Seadoo Bombardier Speedster 1997

[blacktiger]

Hi - finally have found the details of the boat, thanks to great members of this forum.

Underneath the landing Ski board, it is engraved into plastic ,

It is a Seadoo Speedster Bombardier - Twin Rotax Engines...

CEC B3832E7 97 ,
so apparently its a 1997 .

Where and do I need a new MPEM, as I had fuse blown both underneath the steering wheel, and 2 inside the engine fuse box . . .
Reason how and why they blew is unknown still as was running out of water, we drove out the driveway, and some water came gushing out the back - Then as soon as put in calm water, no beeps nothing . .

Replaced all Fuses, and now get One Beep . . .

mechanic has gone over it with electronic device that reads energy etc, and gives off light if power getting through...

Mystery so far ..
And I took it to a Seadoo agent here, but they dont have the software to plug into the key to check the problem.. very frustrating as this is key to our watersports business. Any and all help is greatly appreciated.


What to do next ? ? ?

Please Help you Guru Legends out there !! !

Thanks for your time .

[Jeff Walkowiak]

1 beep means it isn't recognising the key as the correct one,, so possibly the key is bad, possibly the key reader where you plug in the key is bad,, had both those things happen in the past, fuse issues ,, go back and see if they blew out again if so maybe you have a short in the stator plug on front of the engine, or a bad connection where the plugs connect to the brain box,, had that happen in the past myself. could be bad stator windings,, try disconnecting the yellow wires at the rectifier,, all sorts of of different things find a dealer with a computer that will tell you because if the key is bad you will need to get the computer programmed to accept a new key